Sabtu, 23 Juli 2011

SUPER CUT Palm Harvesting Tools


Special Harvesting White Sickle (Code: 900) & Black Sickle (Code: 901)
It made of super high-grade spring steel that goes through a special tempering and forging process to enhance sharpness.

For the white sickle, the raw materials used are imported from Germany and that contribute to the higher quality in its cutting edge.

Both products have 3 sizes, i.e.
a. Small for palm trees from 8’ to 20’ height ( 2,4 mtr – 6 mtr)
b. Medium for palm trees from 20’ to 35’ height (6 mtr – 10,5 mtr)
c. Large for palm trees from 35’ to 55’ height (10,5 mtr – 16,5 mtr)


Palm Harvesting Chisel (Code: 902)
It makes of high-grade spring steel and has 2 / 3 / 4 / 5 / 6 inches.



Harvesting Axe (Code: 904)
It makes of high-grade spring steel and is used for chopping off balance stalk remaining on the fresh fruit bunch (FFB).

Palm (J) Hook / GANCU (Code: 905)
Palm (J) Hook is made in 3 sizes: 12 / 14 / 16 inches.


Palm Lifter (Code: 906) & Palm Lifter – T (Code: 907) /TOJOK
It is designed to lift the FFB from the ground to the FFB Truck or for any FFB lifting purposes

Pole Clamp (Code: 912) & Pole Clamp – Special (Code: 913)
It uses to tighten the Harvesting Sickle and Harvesting Aluminium Alloy Pole








Rabu, 13 Juli 2011

SWF Krantechnik Crane Hoist


Crane component kits by SWF Krantechnik
Your mechanics are satisfied. Your customer is satisfied. You
are satisfied. And that is good.
With the customised crane component packages for bridge
and overhead cranes by SWF the crane constructing becomes
extremely efficient and time saving for you. The most modern
technologies and user-friendly mounting techniques ensure
for your mechanics to finish work on time.
So that you can too.

We supply your crane needs up to 400 Tonnes.

Follow us in:


Selasa, 02 Desember 2008

KHUN HENG-YKL Bunch Crusher


-->
Brand: Khun Heng-YKL (Malaysia)
Model: KH-7.60
Capacity: 45-60 MT of FFB/hr
Gear Reducer: SEW
Motor: Elektrim / 15 kW
Dimension: Height 1,2610mm x Length 2,080mm
x Width 852 mm
Weight: 2,2 Tonnes
Function: to crush and loosen unstripped bunches and hard bunches before deliver to 2nd threshing drum


CB- MODIPALM (PALMITECO) King Cracker



Model : CB 4T King Cracker
Capacity : 4 tons nut/hour
Rotor Rod : 34 pcs hardened steel rod
Stator Rod : 36 pcs hardened steel rod
Motor : ‘Electrim’ or equivalent 5.5kW, 1450rpm, 380-415V,
50Hz, TEFC squirrel cage motor
Bearings : Flanged Type
Efficiency : Up to 99%
Model : CB 6T King Cracker
Capacity : 6 tons nut/hour
Rotor Rod : 34 pcs hardened steel rod
Stator Rod : 36 pcs hardened steel rod
Motor : ‘Electrim’ or equivalent 7.5kW, 1450rpm, 380-415V, 50Hz,
TEFC squirrel cage motor
Bearings : Flanged Type
Efficiency : Up to 99%
Model : CB 8T King Cracker
Capacity : 8 tons nut/hr
Motor : ‘Electrim’ or equivalent 15kW, 1450rpm, 380-415V, 50Hz,
TEFC squirrel cage motor
Transmission : V-belt via taper lock pulley
Belt Cover : Mild steel
Material : a) Ripple plate - Mild steel
b) Rotor rod - Ø25.4 mm x 44 pcs steel rod c/w Ø1” harden sleeve (Outer rod only)
c) Stator rod - Ø25.4 mm x 36 pcs steel rod c/w Ø1”
harden sleeve
Bearing : Flanged Type
Efficiency : Up to 99%

CB-MODIPALM (Palmiteco) Screwpress



-->
Type : Horizontal Double Screw Worm

Model : CB10T/C

Capacity : 10 to 12 tons FFB/Hr
Drive : ‘Electrim’ or equivalent 22kW, 1450 rpm, 380-415V, 50Hz,
TEFC squirrel cage motor
Gear Reducer : ‘SEW’ M3PSF50SPD
Hydraulic : ‘Rexroth’ cone control system RRCS-2B-10 or Vickers ACC
P10
Materials : Press Cage - 3mm S/Holes (Mild steel)
Worm Screw - Cast steel
Spur Gear - Assab 709 (Harden)
Drive Shaf - Assab 709
Spur Gear Box - Solid cast iron (Split casing type)
Body - Mild steel with stainless steel oil sump &
stainless steel inspection door
Strainer - Stainless steel
Pulley - Taper lock
Bearing - ‘SKF’ type
Performance : Running Amp. - 40 Amp.(Max.)
Oil Loss Fibre - 6% to 8%
Nut Breakage - 8% to 11%
Type : Horizontal Double Screw Worm
Model : CB 15T/C
Capacity : 15 to 17 tons FFB/Hr
Drive : ‘Electrim’ or equivalent 30kW, 1450 rpm, 380-415V, 50Hz,
TEFC squirrel cage motor
Gear Reducer : ‘SEW’ M3PSF50SPD
Hydraulic : ‘Rexroth’ cone control system RRCS-2B-15 or Vickers ACC P15
Materials : Press Cage - 3mm S/Holes (Mild steel)
Worm Screw - Cast steel
Drive Shaft - Assab 705
Spur Gear - Assab 709 (Harden)
Spur Gearbox - Solid cast iron (Split casing type)
Body - Mild steel with stainless steel oil sump
& stainless steel inspection door
Strainer - Stainless steel
Pulley - Taper lock
Bearing - ‘SKF’ type
Performance : Running Amp. - Max. 40 Amp.
Oil Loss Fibre - 6% - 8%
Nut Breakage - 8% - 11%
Type : Horizontal Double Screw Worm
Model : CB 20T/C
Capacity : 20 to 22 tons FFB/hour
Hydraulic : ‘Rexroth’ cone control system RRSC-2B/20 or Vickers ACC P20
Drive : ‘Electrim’ or equivalent 37kW, 1450 rpm, 380-415V, 50 Hz,
TEFC squirrel cage motor
Gear Reducer : ‘SEW’ M3PSF60SPD
Materials : Press Cage - 3mm S/Holes (Boiler Plate)
Segmented Worm Screw - Cast steel
Drive Shaft - Assab 705
Screw Drive Shaft - Assab 705
Spur Gear - Assab 709 (Harden)
Spur Gearbox - Solid cast iron (Split Casing)
Body - Mild steel with stainless steel oil sump
& stainless steel inspection door
Strainer - Stainless steel
Bearing - ‘SKF’ type
Performance : Oil loss on dry matter : 7-9%
Nut breakage (On nut) : 10%
Nut breakage (On sample) : 15%

CB MODIPALM (PALMITECO) Digester


-->

CB 3000L DIGESTER

Type : Direct Steam Injection Digester
Model : CB 3000L
Capacity : 3000 litres/hour
Drive : ‘Electrim’ or equivalent 22kW, 1450rpm, 380-415V, 50Hz,
TEFC squirrel cage motor without fluid coupling
Gear Reducer : ‘SEW’ MC3PVSF 04
Materials : Shaft - 115 mm mild
steel square shaft
Chute - 3 mm stainless steel with indicator
(Digester to Screw Press only)
Body - 12 mm mild steel
Liner - 9 mm mild steel
Bottom Wear Plate - 15 mm mild steel
Bottom Base Plate - 25 mm mild steel
Coupling - 16” dia. pin type
Arm - 4 sets stirring arm & 1 set expeller arm
Insulation - B50 rockwool & 0.5mm aluminium cladding
(Supply only)
Type : Direct Steam Injection Digester
Model : CB 3500L
Capacity : 3500 litres/hour
Drive : ‘Electrim’ or equivalent 30kW, 1450rpm, 380-415V, 50Hz,
TEFC squirrel cage motor without fluid coupling
Gear Reducer : ‘SEW’ MC3PVSF 05
Materials : Shaft - 115 mm mild steel square shaft
Chute - 3 mm stainless steel with indicator
(Digester to Screw Press only)
Body - 12 mm mild steel
Liner - 9 mm mild steel
Bottom Wear Plate - 15 mm mild steel
Bottom Base Plate - 25 mm mild steel
Coupling - 16” dia. pin type
Arm - 4 sets stirring arm & 1 set expeller arm
Insulation - B50 rockwool & 0.5mm aluminium cladding
(Supply only)

CB 4000L DIGESTER

Type : Direct Steam Injection Digester
Model : CB 4000L
Capacity : 4000 litres/hour
Drive : ‘Electrim’ or equivalent 37kW, 1450rpm, 380-415V, 50Hz,
TEFC squirrel cage motor without fluid coupling
Gear Reducer : ‘SEW’ MC3PVSF 06
Materials : Shaft - 115 mm mild steel square shaft
Chute - 3 mm stainless steel with indicator
(Digester to Screw Press only)
Body - 12 mm mild steel
Liner - 9 mm mild steel
Bottom Wear Plate - 15 mm mild steel
Bottom Base Plate - 25 mm mild steel
Coupling - 16” dia. pin type
Arm - 5 sets stirring arm & 1 set expeller arm
Insulation - B50 rockwool & 0.5mm aluminium cladding
(Supply only)